91ÊÓÆµ¹ÙÍø

What are EMRs and EHRs? Indispensable Medical and Health Data Systems in Smart Healthcare
Knowledge

What are EMRs and EHRs? Indispensable Medical and Health Data Systems in Smart Healthcare

EMR (Electronic medical record) is focused medical data, mainly used by clinicians for diagnosis and treatment. EHR (Electronic health record) focuses on personal health data, which includes the state of physical, mental, or mental health. EHR has a wider range than EMR.
Published: Nov 21, 2022
What are EMRs and EHRs? Indispensable Medical and Health Data Systems in Smart Healthcare

What is an Electronic Medical Record (EMR)?

Electronic Medical Record is an electronic version of a patient's medical record, which usually contains all of the patient's medical records, diagnoses, medication use, test results, and notes made by physicians. Unlike EHR, EMR only focuses on the communication between the patient and the clinic/hospital to record their medical records and treatment.

Medical records are the main records of medical personnel engaged in medical behavior, are the basis for calculating medical expenses, and are an important source of information to assist clinical decision-making. Traditional paper medical records face many challenges, such as time-consuming delivery, difficult data analysis, and the inability to be used by multiple people at the same time. Inability to limit partial reading, high space and labor costs, difficulty in backup and resource consumption, etc. With the development of information technology, the concept of electronic medical records, which computerized traditional written medical records, came into being. In addition to solving the problem of storage and use of paper medical records, electronic medical records can also improve the efficiency of service and application, and payment, which is of great help in reducing the waste of medical resources.

Benefits of Electronic Medical Records (EMR):
  • Save space and be safer.
  • Save time and be more efficient.
  • It is more convenient to save manpower.
  • Save costs and be more environmentally friendly.
Electronic Medical Record (EMR) records:
  • Patient profile.
  • Medical history, health, and disease testing, and course reports.
  • History of drug use, allergies, and immunizations.
  • Inspection and inspection scheduling, and the functions of obtaining inspection and inspection reports.
  • It can display medical images such as X-ray photographs or MRIs.
  • Doctor's order function, and can provide patient safety functions to reduce the side effects of diagnosis and treatment.
  • Evidence-based recommendations for specific medical conditions are termed clinical practice guidelines.
  • Appointment schedule.
  • Compensation and payment of medical expenses.
  • Patients can be reminded to continue with future visits, tests, and other preventive care.
EMR allows clinicians to:
  • Track data over time.
  • Easily determine which patients need preventive screening or testing.
  • Check the patient's performance on certain parameters.
  • Monitor and improve the overall quality of healthcare in practice.

What is an Electronic Health Record (EHR)?/

Based on the electronic medical record (EMR), EHR not only covers medical records and test results, but also contains all the information of patients in the field of health, such as medical records and diagnosis, testing, and drug records of different subjects, course of treatment, allergies, patient information, and all relevant data. Electronic Health Record integrates patient health information from various sources, including all electronic medical records of the patient, which can be accessed by the patient's healthcare provider from various locations. Ideally, electronic health records should have the characteristics of continuous real-time updating, such as interactivity, interoperability, security, immediacy, and point-of-care. Electronic health records can also be used for non-medical purposes, such as medical quality improvement, outcome reporting, medical resource management, and public health purposes.

Electronic Health Records (EHRs) represent the ability to easily share medical information among stakeholders and enable patient data to follow through a variety of care modalities in which individuals participate. Electronic Health Records (EHRs) are designed to be accessible to all those involved in patient care, including the patient himself. Electronic health records are electronic personal health records (medical records, electrocardiograms, medical images, etc.). Electronic health records can be accessed through computers or the Internet and can contain current and past personal health information. In addition, electronic health records can include medical-related reference data, medical treatment, drug use, demographic data, and other non-medical management data. A personal health record (PHR) is a medical information record held by individual patients or non-professional medical personnel. The sources of personal health records include patient records, physician records, hospital and laboratory records, legal records, power of attorney and insurance records, etc., which can be in the paper, electronic media, or both. Tool. It becomes even more powerful when data is shared securely. Healthcare is a team effort, and sharing data supports that effort. After all, much of the value of a healthcare delivery system stems from the effective exchange of information from one party to another, and ultimately the ability of multiple parties to participate in the exchange of information.

Benefits of Electronic Health Records (EHR):
  • Data collected by primary care providers inform emergency department clinicians about a patient's life-threatening allergies so that care can be adjusted appropriately even if the patient is unconscious.
  • A patient can log into his records and see trends in lab results over the past year, which can help motivate him to take his medication and keep up with lifestyle changes that improve those numbers.
  • The results of the previous test are already in the record, so the tests that the expert patient has already undergone are known, and there is no need to repeat the test.
  • Clinicians' records during a patient's hospital stay can help inform discharge instructions and follow-up care and allow patients to move more smoothly from one care setting to another.
Features of Electronic Health Record Sharing System:
  • System security and privacy protection.
  • Get browsing references, fast and securely.
  • Comprehensive lifetime record.
  • Reduce errors or repeat inspections.

In the process of the medical care industry becoming smart, it is not just medical procedures that are transformed. The real Smart Healthcare is to put consumers at the core and build an entire ecosystem, covering SHC, smart hospitals, clinics, laboratories/imaging A decentralized but shared resource and data ecosystem for facilities such as centers, homes, and care centers.

Published by Nov 21, 2022 Source :

Further reading

You might also be interested in ...

Headline
Knowledge
The Birth of a Fabric: The Science and Craft of Textiles
Although fabric may seem like an ordinary item in our daily lives, its creation involves complex and highly precise processes. From cotton grown in the fields to synthetic fibers produced in factories, each raw material carries unique properties and purposes. Whether it¡¯s the light, airy touch of a shirt or the high protective performance of medical textiles, behind it lies a production chain that spans agriculture, chemistry, and engineering.
Headline
Knowledge
Exploring Major Types of Plastics and Their Properties
Plastic materials are indispensable raw materials in modern manufacturing. Based on their chemical structures and processing characteristics, plastics are mainly classified into two categories: thermoplastics and thermosets. Understanding the properties of these two types aids in material selection and product design, thereby enhancing manufacturing efficiency and product performance.
Headline
Knowledge
Analysis of Green Plastic Manufacturing
With the rise of environmental awareness and the global push for sustainable development goals, traditional plastics face increasing environmental pressure due to their challenges in decomposition and recycling. In response, the manufacturing industry is actively developing and applying eco-friendly plastic materials to build green manufacturing systems. This article explores the types, characteristics, and industrial applications of eco-friendly plastics to assist industry transformation and upgrading.
Headline
Knowledge
Key Parameters for Manufacturing High-Quality Plastic Products
Plastic materials are widely used across various industries due to their lightweight, ease of molding, and versatile properties. 91ÊÓÆµ¹ÙÍøever, different types of plastics exhibit distinct mechanical, thermal, chemical, and dimensional stability characteristics, which directly affect the final product¡¯s performance and service life. Therefore, understanding the performance indicators of plastics is fundamental to designing and manufacturing high-quality plastic products.
Headline
Knowledge
Dry Cutting vs. Wet Cutting: The Balance of Energy Saving, Cost, and Quality
In CNC machining, the choice of cooling method is not simply a technical preference but a multi-faceted trade-off involving cost control, machining quality, tool life, and production line stability. Both dry cutting and wet cutting have their advantages and limitations. To stand out in the fiercely competitive market, companies must shift from pursuing the ¡°theoretically optimal¡± to the ¡°contextually optimal¡± solution.
Headline
Knowledge
The Unsung Heroes of Cutting Tool Coatings: Performance Differences from TiN to DLC
In CNC machining, cutting tool coatings are a critical yet ¡°invisible¡± factor in boosting production efficiency and reducing costs. Although coating thickness is only a few microns, it significantly enhances tool hardness and wear resistance, optimizes heat dissipation, and improves cutting speed and machining accuracy. From classic Titanium Nitride (TiN) to advanced Diamond-Like Carbon (DLC) coatings, different coating materials not only offer varying hardness and heat resistance but also affect tool lifespan and machining adaptability.
Headline
Knowledge
Comprehensive Overview of Plastic Processing Methods: Mastering Key Technologies and Applications
Plastic products play an indispensable role in modern manufacturing, and various plastic processing techniques are crucial for achieving product diversity and efficient production. The following introduces five common and important plastic processing methods, helping readers gain a thorough understanding of their principles, features, and application scopes.
Headline
Knowledge
Fabric Knowledge Base: A Guide to Fiber Applications, From Beginner to Expert Selection
Textile fiber is the fundamental element that determines fabric performance and product suitability. Whether you are a designer, manufacturer, or consumer, understanding the unique characteristics of different fibers and their suitable applications is crucial for precise material selection and informed purchasing. This article will systematically introduce the applications of major natural and synthetic fibers and explain how blending them can overcome the limitations of single fibers, providing versatile functional solutions and helping you build a comprehensive knowledge base of textile applications.
Headline
Knowledge
What is Liquid Injection Molding?
Liquid Injection Molding (LIM) is a manufacturing process that involves injecting liquid silicone rubber (LSR) into precision molds, followed by heating and curing to form high-precision, complex plastic components. Compared to traditional thermoplastic injection molding, LIM offers superior accuracy and the capability to produce more intricate shapes, making it especially suitable for applications demanding high performance and reliability.
Headline
Knowledge
Precision Mold Development and Manufacturing: The Core Technology of Modern Plastic Production
Precision molds form the foundation for the quality and efficiency of plastic part molding. In today¡¯s highly competitive manufacturing environment, the design and fabrication of molds directly impact a product¡¯s functional performance and market competitiveness. Excellent mold development requires not only precise engineering design but also the integration of advanced machining technologies and rigorous quality control to achieve efficient and stable mass production.
Headline
Knowledge
The Magical Journey of Milk Tea
Pouring smooth, rich milk into robust black tea with a unique aroma, then stirring it all together, gets you a cup of milk tea. But do you really know what defines milk tea, and how it differs from the milk tea we enjoy today?
Headline
Knowledge
The Connection Between Textiles and Biomimicry: A Fabric Revolution Inspired by Nature
Lotus leaves after rain shed water droplets without a trace; delicate spider silk is stronger than steel. These are not coincidences but exquisite designs evolved by nature over millions of years. The textile industry is learning from this great designer¡ªnature itself¡ªthrough biomimicry, transforming natural wisdom into fabrics that perform better and are more eco-friendly.
Agree