91ÊÓÆµ¹ÙÍø

Understand 5G at Once!
Trend

Understand 5G at Once!

5G is the fifth generation of mobile data technology. Designed to increase speed, reduce latency, and improve wireless service resiliency. In theory, 5G technology can reach speeds as fast as 20 Gbps, while 4G's top speed is only 1 Gbps. 5G also has less latency, improving the performance of business applications and other digital experiences such as online gaming, video conferencing, and self-driving car performance.
Published: Oct 20, 2022
Understand 5G at Once!
  • What are the Global 5G Frequency Bands?
  • What is 5G Technology?
  • 91ÊÓÆµ¹ÙÍø Does 5G Technology Work?
  • What are the Practical Implications of 5G Technology?
  • What are the Global 5G Frequency Bands?

    At present, the commercial spectrum of 5G development in the world is roughly divided into Sub-6 (below 6GHz), 6 to 24GHz, 24 to 29.5GHz, 37 to 40GHz, and a higher 60 to 90GHz, among which Sub-6 and 24 to 29.5 The GHz frequency band is used in a relatively high proportion relative to other frequency bands.

    What is 5G Technology?

    Whereas previous mobile data technologies such as 4G LTE focused on securing connectivity, 5G takes connectivity to a whole new level by delivering a cloud-to-client connectivity experience. 5G networks are virtualized, software-driven, and cloud-based.

    5G networks also simplify mobile connectivity with smooth and open roaming between mobile data and Wi-Fi access. Mobile device users can stay connected when they move between the outdoor wireless connection and the wireless network in the building, and the user does not need to adjust settings or re-authenticate in response to system requirements.

    The new Wi-Fi 6 wireless standard, also known as 802.11ax, shares characteristics with 5G, including improved performance. Wi-Fi 6 radios can be placed where users need better signal and lower cost. These Wi-Fi 6 radios are based on software-based networking with advanced automation capabilities.

    5G technology should improve the underserved problem of remote areas, and urban areas where demand may exceed the existing capacity of 4G technology can also enjoy better service. The new 5G network will also adopt a dense and distributed access architecture, so that the location of data processing is closer to the edge and users, and the speed of data processing is accelerated.

    91ÊÓÆµ¹ÙÍø Does 5G Technology Work?

    5G technology makes the entire network architecture more advanced. 5G New Radio is the global standard for the air interface of 5G wireless networks, covering the unused spectrum of 4G, making it more powerful. The new antennas can integrate massive MIMO (multiple input, multiple output) technology, allowing multiple transmitters and receivers to transmit more data simultaneously. 91ÊÓÆµ¹ÙÍøever, 5G technology is not limited to the new radio spectrum. This technology is designed to combine licensed and unlicensed wireless technologies to support converged heterogeneous networks. This increases the bandwidth available to users.

    The 5G architecture will be a software-defined platform, with network functions managed through software rather than hardware. Virtualization, cloud technology, and IT and business process automation, these advanced developments all give 5G architecture flexibility and flexibility for users to access anytime, anywhere. 5G networks can create software-defined sub-network structures called network slicing. Through this slicing technology, network administrators can specify network functions based on users and devices.

    5G can also enhance digital experiences through machine learning (ML) automation. If you want the response time to be less than one second (such as the response time of a self-driving car), you need 5G network support, automation through machine learning, and finally combined with deep learning and artificial intelligence (AI), to realize the dream. Automate provisioning and proactively manage traffic and services to reduce infrastructure costs and improve connection experience.

    What are the Practical Implications of 5G Technology?

    5G technology not only creates a new generation of improved network performance and speed, but also brings a brand new connection experience to users.

    In healthcare, 5G technology and Wi-Fi 6 connectivity will allow healthcare workers to monitor patients through connected devices that continuously transmit data from vital health monitoring devices such as heart rate and blood pressure. In the automotive industry, 5G combined with machine learning algorithms will provide information on road conditions such as traffic flow and accidents; vehicles will be able to share information with other vehicles and physical facilities on the road such as traffic lights. These are just two practical uses of 5G technology in the industry, both of which can provide users with a better and safer experience.

    5G technology brings us new speed and new possibilities.

    Published by Oct 20, 2022 Source :

    Further reading

    You might also be interested in ...

    Headline
    Trend
    EU Rules and Taiwan¡¯s Textile Sustainability Shift
    In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
    Headline
    Trend
    New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
    As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
    Headline
    Trend
    Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
    The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
    Headline
    Trend
    Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
    High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
    Headline
    Trend
    CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
    India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
    Headline
    Trend
    Global Competitiveness of Taiwan¡¯s Lathe Industry
    As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
    Headline
    Trend
    Comprehensive Analysis of Vertical Injection Molding Machine Trends: Intelligence, Multifunctionality, and Brand Competition
    Vertical injection molding machines, owing to their unique structural design and operational advantages, are widely used in electronics, medical devices, automotive components, and high-precision plastic part manufacturing. They are especially indispensable for insert molding and in-mold decoration (IMD) processes. As global manufacturing advances toward smarter, higher-efficiency operations, the vertical injection molding machine market is showing several clear trends.
    Headline
    Trend
    Textile Black Tech: The Superpowers of Functional Fabrics
    Have you ever wondered why some jackets can block wind and rain without making you feel stuffy? Or why some sportswear wicks away sweat quickly, keeping you dry? This isn't magic; it's the superpower of high-performance textiles. They are no longer just clothes but key materials that improve quality of life and ensure personal safety.
    Headline
    Trend
    Integrated Plastic Manufacturing: Industry Applications and Development Trends
    Modern manufacturing faces challenges of small-batch diversity, high customization, and shortened time-to-market. Traditional segmented outsourcing models struggle to respond effectively. Mold design, injection molding, and post-processing are handled by different vendors, often causing unstable delivery schedules, significant quality variations, and difficulty in making changes. To address these trends, the industry is accelerating toward integrated ¡°one-stop¡± manufacturing services. Chiakuan Industrial Co., Ltd. has long focused on providing comprehensive plastic manufacturing solutions, covering mold design, injection molding, surface treatment, and assembly and packaging. This fully meets companies¡¯ demands for ¡°one-stop outsourcing,¡± significantly improving development efficiency and delivery quality, while enhancing rapid market response and competitiveness.
    Headline
    Trend
    Edible Film Packaging: The Delicious and Eco-Friendly Solution
    Imagine a candy wrapper you don't have to unwrap and that doesn't become trash. Would you eat it or throw it away? With modern technology advancing daily, the food packaging industry has developed edible film packaging to keep up with sustainability trends, allowing you to eat the protective layer directly while enjoying your food.
    Headline
    Trend
    From Trade Wars to Bubble Tea: When Global Tariffs Impact a Local Industry
    In today's globalized world, changes in a country's trade policies can have far-reaching consequences. A single tariff agreement or trade barrier not only affects large-scale international commodity trading but can also subtly alter our daily consumption habits. When this wave of trade protectionism sweeps across the globe, even Taiwan's most iconic cultural export¡ªbubble tea¡ªcannot remain untouched. In the following, we'll delve into how tariffs impact the bubble tea industry's supply chain and the challenges and opportunities they present.
    Headline
    Trend
    The Evolution and Challenges of Five-Axis Machining: Future Directions for High-Complexity Manufacturing
    Five-axis machining technology marks a major leap for the manufacturing industry, moving from traditional three-axis methods to advanced machining. It enables the production of complex, multi-angled parts in a single setup, significantly boosting both efficiency and precision. 91ÊÓÆµ¹ÙÍøever, to fully unlock the potential of five-axis machining, companies need more than just costly equipment¡ªthey also require skilled operators, rigorous process management, and the support of smart manufacturing technologies such as AI, automation, and digital simulation. Looking ahead, five-axis machining will continue evolving toward greater precision, environmental sustainability, and hybrid manufacturing, integrating sustainable principles to help businesses strengthen their competitiveness. Overall, five-axis machining is not merely an equipment upgrade, but a comprehensive transformation that blends technology, talent, and management¡ªmastering these elements will be the key to business success.
    Agree