91ÊÓÆµ¹ÙÍø

As the 5G Era Approaches,  What Is About 6G?
Trend

As the 5G Era Approaches, What Is About 6G?

The 6G technology after 5G has already been studied by existing countries. Relative to the revolutionary change of 5G, 6G should be the perfection, strengthening, and further optimization and promotion of 5G technology.
Published: Jun 26, 2023
As the 5G Era Approaches,  What Is About 6G?

This is the same as the evolution from 3G to 4G. 3G is moving from the era of digital communications to the era of data communications. Although 2G also has digital communication capabilities, it mainly sends SMS and caller ID. Internet access is a very secondary capability. The amount of data used by users is also very small. The core network and billing system of telecommunications companies are based on voice. After entering 3G, although the voice is still very important, the network is no longer voice-centric. Data services have become an important business. The core network and billing system are data-centric systems. From 2G to 3G, it is a revolution for the communication network and a completely new transformation.

91ÊÓÆµ¹ÙÍøever, objectively speaking, the network speed of 3G is still relatively slow, and 4G has greatly improved the network speed, which has greatly improved the user experience. We can understand 4G as technological evolution, but the network speed has increased, and its infrastructure and basic capabilities have not changed revolutionarily compared to 3G. Even a large number of 4G services are gradually built based on 3G. 91ÊÓÆµ¹ÙÍøever, with the advent of 4G, the efficiency of these services has been greatly improved, ushering in the outbreak period.

5G has made more demands in technology, with faster speed, lower power consumption, and lower latency. Compared with the 4G network, 5G adjusts and rebuilds the entire network structure, and the core network, management, and billing system will also undergo tremendous changes. The business formed based on 5G is no longer limited to the transmission of information, but a smart Internet. This network integrates mobile Internet, smart sensing, big data, and smart learning to form new capabilities, which can be said to be a revolutionary change. The 5G revolution embodies huge changes in technology, management, billing, business models, business models, and business forms.

So, can 5G realize all visions and achieve perfect feelings and experiences? Not 5G also undergoes a long-term evolution process, and gradually improves from the network, management system, and other aspects. Therefore, in this sense, 6G will not undergo technological revolution again and make revolutionary changes in the system, but based on 5G, according to the actual operating situation, new problems are found, or the deficiencies of 5G are improved.

6G Will Further Integrate the Network

At present, the mobile communication network and the satellite network are two independent networks, which operate independently and cannot play a role of integration and supplementation. 6G may have a trend of integration between heaven and earth. A network can not only provide land coverage through ground base stations but also jointly network through low-orbit satellites and high-orbit satellites. On the ground, through many repeaters, small The base station provides deep coverage. The integration of the network can take into account the surface and the point. Through high-orbit satellites and low-orbit satellites, the surface is guaranteed to exist in any corner of the earth. At the same time, in densely populated areas or the current network is not enough Dense areas are covered deeply and can go underground, such as subways, tunnels, parking lots, mines, and other special places with poor signals.

In addition to being able to be covered at a certain depth below the surface, underwater communication should also be possible in the 6G era and become part of the entire network coverage system. For example, in offshore, rivers, and lakes, water quality, underwater plants, underwater organisms, underwater culture products, water temperature changes, nutrient content in water, pollutant content, displacement of underwater dams, etc. are all required. Monitoring and underwater monitoring with network coverage will greatly improve the monitoring and management capabilities. 6G can also play an important role in collecting ocean-related data, monitoring environmental pollution, climate change, seafloor anomalies, seismic volcanic activity, exploring seafloor targets, and transmitting underwater long-distance images, and even in the military field. Obviously, in the 4G and 5G eras, underwater network coverage is not considered at all, and planning and breakthroughs should be made in the 6G era.

Specifically, underwater wireless communication can use various technologies such as underwater electromagnetic wave communication, underwater acoustic communication, and underwater quantum communication. If the frequency is higher than 100KHz, it can be radiated into the space Radiofrequency (RF), there will be a greater chance in underwater wireless communication. Through the improvement of technical capabilities, high-speed transmission of data of more than 100Kbps becomes possible. It can also resist the influence of noise, achieve relatively low latency and low power consumption, and have higher security. Radiofrequency communication may become an important choice for underwater wireless communication. Besides, underwater laser communication and lower neutrino communication will also become widely-received technologies, but these technologies still need to be continuously improved.

An important step for 6G is to use satellites, ground stations, small base stations, underwater base stations, and other technologies and methods to connect the sky, ground, underground, and water into a whole so that the network is truly ubiquitous. For the communications industry, there are still no small challenges to realize these capabilities. If these networks are to be integrated into a whole and form a new business model, there are still many areas that must be improved and perfected.

Use more spectrum to improve efficiency and capabilities

To achieve greater bandwidth, more spectrum must be used for mobile communications. In the 5G era, 800/900MHz is used in the IoT frequency band of the Internet of Things. The spectrum from 3.4GHz to 3.6GHz and 20GHz to 60GHz are all considered as 5G, which greatly increases the usable spectrum and improves network capacity and bandwidth.

6G networks require greater bandwidth. The peak speed of 6G will reach 100Gbps, while the peak speed of 5G is only 20Gbps, and the single-channel bandwidth will also reach 1GHz, while the single-channel bandwidth of 5G is the only 100MHz, through multiple 1GHz Bandwidth is combined to achieve 100Gbps speed. To achieve the single-channel 1GHz bandwidth, the spectrum of the lower frequency band is not enough to support. This requires more spectrum to be used for mobile communications. Millimeter-wave has been adopted in the 5G era. It can be expected that in the 6G era Terahertz (THz) waves will enter people's vision.

The wavelength of the megahertz wave is 3¦Ìm¡«3000¦Ìm, and the frequency is 0.1THz¡«10THz. It is an electromagnetic wave between microwave and lightwave. It has the advantages of microwave communication and lightwave communication, which gives it a difference from other electromagnetic waves to a certain extent. The characteristics, that is, high transmission speed, large capacity, strong directionality, high security, and strong penetration, etc.

The higher the frequency, the greater the communication capacity. This is the basic principle of the communication field. The frequency of the megahertz wave is one to four orders of magnitude higher than the currently used microwaves. It can provide wireless transmission speeds of more than 10Gbps-this is a height that microwaves cannot reach-and it is more effective in solving the problem of message transmission constrained by bandwidth Big benefits.

Megahertz waves are used for long-distance transmission. It is difficult to have a good effect, but today's communication network is a backbone transmission network constructed by an optical fiber network. The base station is used to extend the optical fiber network to form a mobile network. The user can switch between different base stations at will, so that he can not drop the line anytime and anywhere, and can support high speed. The future mobile communication network is a large-scale cellular network, which needs to be covered in a long-distance and large-scale, and the cellular will become smaller and smaller. The future network will be under a huge fiber-optic network, through many small base stations with the family as the main unit, to form an ultra-high density, ultra-high-speed, densely deployed network system. In this system, the high-speed transmission is required in densely populated areas. Megahertz technology can use high speed, large capacity, and high penetration to realize the deployment of office and home environments.

The higher the electromagnetic wave frequency band, the worse the ability to diffract and penetrate. Millimeter waves are difficult to penetrate. Therefore, in cities, whether it is an office or home environment deployment, there are major problems. Lightwave has better penetration, and it does not need to compete with other industries for spectrum, so it can achieve a large bandwidth. Because of these characteristics, megahertz technology is particularly suitable for deployment in office and home environments in densely populated urban areas. The distance between these places is not a problem, but bandwidth and penetration are big problems.

A More Intelligent Communication Network

In the future, AI functions will be increasingly introduced into communication networks, turning it into a smart network.

In the traditional communication network, the trinity of a pipeline, management, and business is provided by the telecommunications company, but the telecommunications company only carries one service of voice, and the management is also very simple. In the 5G era, the network will become more complicated. If we build multiple communication networks, that is, build multiple pipeline systems, not only will social costs be greatly increased, but social resources will also be insufficient. Give a simple example. There are multiple systems in the city such as electricity, telecommunications, sewage, etc., all of which require pipelines. If each system builds its pipeline, it is not only costly but also very difficult to manage, which requires a pipeline to share resources.

With the development of 5G, the communication network is no longer a network for voice communication between humans, not only a network that can provide Internet services, but also a large number of Internet of Things services, city management services, and smart transportation services. , Smart home business and the security, priority, and resource allocation of different services are different. Such a network must establish a powerful intelligent management model to intelligently manage different businesses and users. Based on this, it is necessary to integrate AI technology into the network to identify different users, user behaviors and terminals, and to perform resource allocation and tariff management on this basis.

A question worth discussing is that the future 6G network is a complex network system with extremely high resource requirements. So do we need to establish several networks in a country? On the one hand, resources are very limited; on the other hand, mutual interference between networks is also a big problem. When the network penetrates every corner of the society, if a corner covers three or more networks, not only will resources be wasted, but the quality of the network will also be affected.

Based on this, the 6G era should explore the construction of only one fully-covered network in a country. In this way, not only can resources be fully utilized, the waste of configuring several sets of equipment in each place can be reduced, but the cost of site rental can also be greatly reduced, And avoid interference between networks. Such a network has higher quality, uses fewer resources, and has less impact on users.

Of course, it is impossible to merge multiple operators into one, and there is no competition at all. This requires the separation of the network and the business: multiple operators use the same network to provide their services. The competitiveness of telecommunications companies is mainly reflected in their capabilities in management, platform, R&D, operation, service, and maintenance. Because of their different capabilities, the level of service provided is different, and users have different choices.

Telecommunication companies establish their business management platform, billing platform, charging platform, business support platform (BSS) and customer service platform on the network, and then provide different products and services to individual users, enterprise users, and institutional users. Users can use one ID for identification and use multiple different services at the same time. Users do not need to register an ID for each service, that is, one ID, multiple services, and a fee.

The network can also use AI technology for user identification, and then provide different network resources and security guarantees according to different user identities and terminals.

At that time, a country has only one communication network, and multiple network capabilities are stacked at multiple levels. Telecom companies are no longer fighting for network capabilities, but for R&D, management, operation, and service capabilities. These should be the entire network in the 6G era. New changes in management.

Published by Jun 26, 2023 Source :

Further reading

You might also be interested in ...

Headline
Trend
EU Rules and Taiwan¡¯s Textile Sustainability Shift
In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
Headline
Trend
New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
Headline
Trend
Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
Headline
Trend
Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
Headline
Trend
CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
Headline
Trend
Global Competitiveness of Taiwan¡¯s Lathe Industry
As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
Headline
Trend
Comprehensive Analysis of Vertical Injection Molding Machine Trends: Intelligence, Multifunctionality, and Brand Competition
Vertical injection molding machines, owing to their unique structural design and operational advantages, are widely used in electronics, medical devices, automotive components, and high-precision plastic part manufacturing. They are especially indispensable for insert molding and in-mold decoration (IMD) processes. As global manufacturing advances toward smarter, higher-efficiency operations, the vertical injection molding machine market is showing several clear trends.
Headline
Trend
Textile Black Tech: The Superpowers of Functional Fabrics
Have you ever wondered why some jackets can block wind and rain without making you feel stuffy? Or why some sportswear wicks away sweat quickly, keeping you dry? This isn't magic; it's the superpower of high-performance textiles. They are no longer just clothes but key materials that improve quality of life and ensure personal safety.
Headline
Trend
Integrated Plastic Manufacturing: Industry Applications and Development Trends
Modern manufacturing faces challenges of small-batch diversity, high customization, and shortened time-to-market. Traditional segmented outsourcing models struggle to respond effectively. Mold design, injection molding, and post-processing are handled by different vendors, often causing unstable delivery schedules, significant quality variations, and difficulty in making changes. To address these trends, the industry is accelerating toward integrated ¡°one-stop¡± manufacturing services. Chiakuan Industrial Co., Ltd. has long focused on providing comprehensive plastic manufacturing solutions, covering mold design, injection molding, surface treatment, and assembly and packaging. This fully meets companies¡¯ demands for ¡°one-stop outsourcing,¡± significantly improving development efficiency and delivery quality, while enhancing rapid market response and competitiveness.
Headline
Trend
Edible Film Packaging: The Delicious and Eco-Friendly Solution
Imagine a candy wrapper you don't have to unwrap and that doesn't become trash. Would you eat it or throw it away? With modern technology advancing daily, the food packaging industry has developed edible film packaging to keep up with sustainability trends, allowing you to eat the protective layer directly while enjoying your food.
Headline
Trend
From Trade Wars to Bubble Tea: When Global Tariffs Impact a Local Industry
In today's globalized world, changes in a country's trade policies can have far-reaching consequences. A single tariff agreement or trade barrier not only affects large-scale international commodity trading but can also subtly alter our daily consumption habits. When this wave of trade protectionism sweeps across the globe, even Taiwan's most iconic cultural export¡ªbubble tea¡ªcannot remain untouched. In the following, we'll delve into how tariffs impact the bubble tea industry's supply chain and the challenges and opportunities they present.
Headline
Trend
The Evolution and Challenges of Five-Axis Machining: Future Directions for High-Complexity Manufacturing
Five-axis machining technology marks a major leap for the manufacturing industry, moving from traditional three-axis methods to advanced machining. It enables the production of complex, multi-angled parts in a single setup, significantly boosting both efficiency and precision. 91ÊÓÆµ¹ÙÍøever, to fully unlock the potential of five-axis machining, companies need more than just costly equipment¡ªthey also require skilled operators, rigorous process management, and the support of smart manufacturing technologies such as AI, automation, and digital simulation. Looking ahead, five-axis machining will continue evolving toward greater precision, environmental sustainability, and hybrid manufacturing, integrating sustainable principles to help businesses strengthen their competitiveness. Overall, five-axis machining is not merely an equipment upgrade, but a comprehensive transformation that blends technology, talent, and management¡ªmastering these elements will be the key to business success.
Agree