91ÊÓÆµ¹ÙÍø

Forward-Looking Technology of End-to-End Encrypted Communication Protocol
Knowledge

Forward-Looking Technology of End-to-End Encrypted Communication Protocol

When you chat with friends or family members using communication software, the information may be intercepted when transmitted on the Internet, thereby exposing the chat content. If the content contains confidential information, it may endanger privacy and security. End-to-end encryption (E2EE) is a method of protecting data that prevents potential eavesdroppers from monitoring data in transit.
Published: Jul 18, 2022
Forward-Looking Technology of End-to-End Encrypted Communication Protocol

Due to the popularity of mobile phones and portable devices, people can easily connect to the Internet anytime, anywhere, and there has been an explosive growth in the sharing and publishing of user-generated content by mobile phones and portable devices. People are alert to the illegal monitoring of sensitive personal and private communications, and they have begun to pay attention to personal information security, but how to effectively conduct secure communications? A reliable and auditable mechanism is needed to protect communications and important secrets.

The importance of communication confidentiality: Information protection is carried out through encryption technology to avoid information leakage or illegal use of information.

What is Encryption?

Encryption is the encryption of a message so that only a specific recipient can decode it. Encryption software converts your information into ciphertext, a sequence that humans cannot identify. Even if someone intercepts your message, the encrypted data cannot be decrypted unless you have the private key. The most used AES encryption algorithm is almost impossible to break. This technique uses a 256-bit key to generate various combinations, which currently cannot be cracked by even a supercomputer in a reasonable amount of time.

What Types of Encryptions are There?

Symmetric encryption:
Symmetric Encryption is where the sender and receiver use the same private key to encrypt and decrypt messages. This set of keys is shared between two or more members to maintain exclusive communication links. Symmetric encryption is faster, but the main disadvantage is that the key is shared by both parties. Unless a secure channel is established, keys can be intercepted and messages can be deciphered.

Asymmetric encryption:
Asymmetric Encryption uses a more advanced and secure method to protect data. It encrypts messages using two keys: a public key and a private key. The sender and receiver use the same public key and use different private keys, which means that neither side of the communication knows the other's private key.

In this case, only someone who has both the private key and the public key can decrypt the message. If a message is intercepted in transit by a malicious person, even if they have the public key, they will not be able to access the message. Only someone with a private key can decrypt the message. Although asymmetric encryption is more advanced than symmetric encryption, both the sender and receiver endpoints are not protected. If a hacker breaks into any device and steals both keys, they can get their hands on the data.

What is End-to-End Encryption?

End-to-end encryption is a communication system in which only the users involved in the communication can read the information. It prevents potential eavesdroppers, including telecommunication providers, Internet service providers, and providers of the communication system, from obtaining the clear text of the communication between the two parties. Such systems are designed to prevent potential surveillance or tampering attempts. Communication providers using end-to-end encryption cannot decrypt users' messages, let alone provide their customers' communications to authorities.

Encryption is carried out between the sender and the receiver; the encrypted state is maintained during the transmission of the message. Both the sender and receiver endpoints are not protected, so even if the transmission is encrypted. At best the communication between the client and the server is guaranteed to be protected. 91ÊÓÆµ¹ÙÍøever, the operators on the server side (such as ISPs or cloud services) still have a chance to see your messages.

End-to-end encryption (E2EE or e2e) encrypts the message during the entire transmission process between two endpoints, keeps it encrypted when passing through the cloud server, and decrypts it only at the user end, so service providers, ISPs, or any third party. In other words, this technology ensures that only the user involved in the communication can read the message and prevents the message from being stolen in transit. Although a VPN does not use end-to-end encryption, it is safer to use a VPN when surfing the web because the VPN service encrypts traffic and changes IP addresses. This way, your traffic flows securely and privately through cloud servers.

Key exchange:
In an end-to-end encrypted system, the keys used for encryption and decryption must be mastered by, and only by, the parties involved in the communication. To achieve this, end-to-end encryption systems can encrypt data using a predetermined string of characters (a pre-shared key), or use the string to generate a one-time password for encryption. In addition, the parties involved in the communication can also establish a key through negotiation.

91ÊÓÆµ¹ÙÍø to Use End-to-End Encryption?

Many applications or services support end-to-end encryption. It is recommended that you use software or services with end-to-end encryption and enable it for more secure communications. Especially when you process sensitive information such as banking or personal data online. End-to-end encryption plays an important role in secure instant messaging applications. Many instant messaging applications have built-in end-to-end encryption. 91ÊÓÆµ¹ÙÍøever, some communication software does not have end-to-end encryption enabled by default and must be turned on manually.

In addition, end-to-end encryption can be used to protect email communications, as well as backup services and P2P services. Zero-knowledge encryption is more secure because it encrypts files and can only decrypt them on your device. The service provider cannot access this data, but if you forget your password or lose your device, you will never be able to access the data.

Possible threat

  • End-to-end encryption cannot protect the client device, so hackers can obtain the public key or private key if they attack the client device. Alternatively, data can also be obtained via an app.
  • Some chat systems may not be able to encrypt their backup data, you should ensure that the application fully implements end-to-end encryption.
  • Backdoor attacks can bypass encryption technology. Such attacks can be carried out using Trojans, malware, or malicious code. As a result, hackers may plant malicious programs on your device and access data.

Pros and Cons of End-to-End Encryption:

Disadvantages of end-to-end encryption:
End-to-End Encryption for some, the value proposition of E2EE is problematic because no one can access your messages without the corresponding key. Opponents argue that criminals can safely use E2EE knowing that governments and tech companies cannot decrypt their communications. They support legislation that would allow them to access communications through a backdoor system. It is worth noting that applications using E2EE are not 100% secure. Messages are obfuscated as they pass from one device to another, but they are visible at the endpoint i.e., a laptop or smartphone on either side.
E2EE guarantees that no one can read your data during transmission. But other threats remain:

  • Your device can be stolen: If you don't have your PIN or if an attacker bypasses it, they can access your messages.
  • Your device may be affected: Your computer may have malware that monitors messages before and after sending them.
Another risk is that someone could intervene between you and the other party through a man-in-the-middle attack. If you are doing a key exchange, you are not sure that the other party is your friend. You may unknowingly establish a key with an attacker. The attacker then receives your message and they have the decryption key. They can trick your friends in the same way, that is, they can forward messages and read or modify them as they see fit. To address this, many applications integrate some type of secure code functionality. This is a string of numbers or a mobile barcode that can share with your contacts through a secure channel. If the numbers match, you can be sure that a third party is not snooping on your communications.

Advantages of end-to-end encryption:
In a setting without any of the above vulnerabilities, E2EE is undoubtedly a valuable resource for improving confidentiality and security. It's a technology embraced by privacy activists around the world and integrated into the apps we're used to using, meaning anyone with access to a phone can use it. It would be a mistake to view E2EE as a mechanism that is only useful to criminals and whistleblowers. It turns out that even the most secure-looking companies can be vulnerable to cyberattacks that expose unencrypted user information to malicious parties. Access to personal data such as sensitive communications or identification documents can have a catastrophic impact on an individual's life.

Technology Outlook

Despite these potential vulnerabilities, end-to-end encryption remains a solid technology for ensuring privacy and security. It is recommended to use applications with built-in end-to-end encryption whenever possible. End-to-end encryption ensures the security of transmitted data, and only the user involved in the communication can decrypt the message. But end-to-end encryption cannot avoid the security risks of the endpoint itself. There is still the possibility that the key has been stolen on the client device, or that the decrypted message can be read.

Published by Jul 18, 2022 Source :

Further reading

You might also be interested in ...

Headline
Knowledge
Exploring Major Types of Plastics and Their Properties
Plastic materials are indispensable raw materials in modern manufacturing. Based on their chemical structures and processing characteristics, plastics are mainly classified into two categories: thermoplastics and thermosets. Understanding the properties of these two types aids in material selection and product design, thereby enhancing manufacturing efficiency and product performance.
Headline
Knowledge
Analysis of Green Plastic Manufacturing
With the rise of environmental awareness and the global push for sustainable development goals, traditional plastics face increasing environmental pressure due to their challenges in decomposition and recycling. In response, the manufacturing industry is actively developing and applying eco-friendly plastic materials to build green manufacturing systems. This article explores the types, characteristics, and industrial applications of eco-friendly plastics to assist industry transformation and upgrading.
Headline
Knowledge
Key Parameters for Manufacturing High-Quality Plastic Products
Plastic materials are widely used across various industries due to their lightweight, ease of molding, and versatile properties. 91ÊÓÆµ¹ÙÍøever, different types of plastics exhibit distinct mechanical, thermal, chemical, and dimensional stability characteristics, which directly affect the final product¡¯s performance and service life. Therefore, understanding the performance indicators of plastics is fundamental to designing and manufacturing high-quality plastic products.
Headline
Knowledge
Dry Cutting vs. Wet Cutting: The Balance of Energy Saving, Cost, and Quality
In CNC machining, the choice of cooling method is not simply a technical preference but a multi-faceted trade-off involving cost control, machining quality, tool life, and production line stability. Both dry cutting and wet cutting have their advantages and limitations. To stand out in the fiercely competitive market, companies must shift from pursuing the ¡°theoretically optimal¡± to the ¡°contextually optimal¡± solution.
Headline
Knowledge
The Unsung Heroes of Cutting Tool Coatings: Performance Differences from TiN to DLC
In CNC machining, cutting tool coatings are a critical yet ¡°invisible¡± factor in boosting production efficiency and reducing costs. Although coating thickness is only a few microns, it significantly enhances tool hardness and wear resistance, optimizes heat dissipation, and improves cutting speed and machining accuracy. From classic Titanium Nitride (TiN) to advanced Diamond-Like Carbon (DLC) coatings, different coating materials not only offer varying hardness and heat resistance but also affect tool lifespan and machining adaptability.
Headline
Knowledge
Comprehensive Overview of Plastic Processing Methods: Mastering Key Technologies and Applications
Plastic products play an indispensable role in modern manufacturing, and various plastic processing techniques are crucial for achieving product diversity and efficient production. The following introduces five common and important plastic processing methods, helping readers gain a thorough understanding of their principles, features, and application scopes.
Headline
Knowledge
Fabric Knowledge Base: A Guide to Fiber Applications, From Beginner to Expert Selection
Textile fiber is the fundamental element that determines fabric performance and product suitability. Whether you are a designer, manufacturer, or consumer, understanding the unique characteristics of different fibers and their suitable applications is crucial for precise material selection and informed purchasing. This article will systematically introduce the applications of major natural and synthetic fibers and explain how blending them can overcome the limitations of single fibers, providing versatile functional solutions and helping you build a comprehensive knowledge base of textile applications.
Headline
Knowledge
What is Liquid Injection Molding?
Liquid Injection Molding (LIM) is a manufacturing process that involves injecting liquid silicone rubber (LSR) into precision molds, followed by heating and curing to form high-precision, complex plastic components. Compared to traditional thermoplastic injection molding, LIM offers superior accuracy and the capability to produce more intricate shapes, making it especially suitable for applications demanding high performance and reliability.
Headline
Knowledge
Precision Mold Development and Manufacturing: The Core Technology of Modern Plastic Production
Precision molds form the foundation for the quality and efficiency of plastic part molding. In today¡¯s highly competitive manufacturing environment, the design and fabrication of molds directly impact a product¡¯s functional performance and market competitiveness. Excellent mold development requires not only precise engineering design but also the integration of advanced machining technologies and rigorous quality control to achieve efficient and stable mass production.
Headline
Knowledge
The Magical Journey of Milk Tea
Pouring smooth, rich milk into robust black tea with a unique aroma, then stirring it all together, gets you a cup of milk tea. But do you really know what defines milk tea, and how it differs from the milk tea we enjoy today?
Headline
Knowledge
The Connection Between Textiles and Biomimicry: A Fabric Revolution Inspired by Nature
Lotus leaves after rain shed water droplets without a trace; delicate spider silk is stronger than steel. These are not coincidences but exquisite designs evolved by nature over millions of years. The textile industry is learning from this great designer¡ªnature itself¡ªthrough biomimicry, transforming natural wisdom into fabrics that perform better and are more eco-friendly.
Headline
Knowledge
What Is a CNC Machine Tool? Unveiling the Secret Behind Modern Factories¡¯ High Efficiency
CNC (Computer Numerical Control) machine tools are automated devices that control machining processes through computer programming. Known for their high efficiency, precision, and stability, they are widely used across industries such as aerospace, automotive, mold making, electronics, medical, and energy. With the rise of Industry 4.0 and smart manufacturing, CNC technology continues to evolve toward multi-axis machining, intelligent control, remote monitoring, and integrated processes. This widespread adoption not only enhances manufacturing performance but also reshapes the workforce, shifting traditional manual skills toward digital operation and system integration¡ªbringing greater production flexibility and competitiveness to businesses.
Agree