91ÊÓÆµ¹ÙÍø

What is a Quantum Computer? What are the Challenges in the Development of Quantum Computing?
Trend

What is a Quantum Computer? What are the Challenges in the Development of Quantum Computing?

The real power of quantum computers is not the speed of computing, but the ability to process problems in parallel. By harnessing the uncertainty of quantum physics, it could revolutionize medicine, accelerate artificial intelligence, and upend cryptography.
Published: Sep 22, 2022
What is a Quantum Computer? What are the Challenges in the Development of Quantum Computing?

Quantum computers, with the potential of their powerful computing speed and power, have attracted global scientific and industrial circles. Technological breakthroughs in recent years seem to bring the computing power of quantum computers closer to commercial applications. In today's era of the knowledge economy and globalized competition, computing power is the competitiveness of countries and enterprises. Therefore, quantum computers have been regarded as a key development technology by various countries in recent years.

What is Quantum Computing?

A quantum bit (qubit) is the most basic operation unit of a quantum computer. For a qubit to be used, the quantum must reach quantum superposition and quantum entanglement, a single quantum must be in two physical states at the same time, and the two quanta must be in between. A connection is formed so that even if the two quanta are not in the same space, they can instantly influence each other so that they can be used as the basic unit of quantum computing. Quantum can be electrons, ions, or photons. If it can achieve superposition and entanglement, it can be used as qubits. The reading and writing of qubits can be transmitted through microwaves, magnetic pulses, or lasers. At present, there are five main quantum computing methods: silicon spin quantum, ion trap, superconducting loop, diamond vacancy, and topological quantum.

Qubits and Probabilities:

Traditional computers store and process information in bits, which can be either 1 or 0, but not both. The equivalent of quantum operations is qubits. A qubit is any quantum system in which two quantum states (0 and 1) can be superimposed. Each possible quantum state has an associated probability magnitude. Only after the qubit is measured, the state of the qubit collapses to either a 0 state or a 1 state, depending on the associated probability, so a certain probability will take one of the possible states. The probability of which way the qubit will collapse is determined by quantum interference. Quantum interference affects the state of a qubit to interfere with the probability of a particular outcome during measurement, and this probability state is the remarkable capability of quantum computing.

Quantum Simulation:

Quantum mechanisms are the fundamental operating systems of the universe, which describe how the fundamental building blocks of nature behave. Essential behaviors, such as chemical reactions, biological reactions, and material formations, often involve quantum interactions of many agents. Qubits can be used to represent the natural state of the problem if the quantum-mechanical system is modeled in essence. Examples of quantum systems that can be modeled include photosynthesis, superconductivity, and complex molecular formation.

Quantum Acceleration:

One of the goals of quantum computing research is to study what problems quantum computers can solve faster than conventional computers, and how fast they can be accelerated. Shor's algorithm executed on a quantum computer could disrupt traditional cryptographic configurations, such as the Rivest¨CShamir¨CAdleman (RSA) configuration, which is widely used in e-commerce for secure data transfer. This mechanism uses traditional algorithms to decompose prime numbers according to the actual difficulty of decomposing prime numbers. Quantum encryption ensures information security by applying fundamental physics rather than complexity assumptions.

Quantum Machine Learning:

Machine learning on traditional computers has revolutionized the scientific and business worlds. But the computational cost of finalizing the model hinders its development and field of application. The field of quantum machine learning explores how to design and implement quantum software so that machine learning can perform faster than conventional computers. The Quantum Development Kit (QDK) comes with a quantum machine learning library to perform hybrid quantum/traditional machine learning experiments. This library contains examples and tutorials and provides the necessary tools to implement new hybrid quantum and traditional algorithms (circuit-centric quantum classifiers) for supervised classification problems.

Why are Quantum Computers More Powerful than Traditional Computers?

Unlike traditional computers, quantum computers are limited by the number of bits in the operation steps. There is a linear relationship between the number of possible groups of numbers, and when the possibilities to operate grow exponentially, even a supercomputer will take too long to solve the problem. Due to its special quantum characteristics, quantum operations can directly obtain solutions in 16 possible situations after 4 operations when faced with the problem of 4-bit combination numbers, and 20-bit combinations can be found after 1000 operations. One million possible sets of specific numbers, and the number of operations only needs to be the square root of the total number of possible cases, which satisfies the exponential complex operational requirements.

Compared with traditional digital computers, quantum computers process information in a completely different way. When dealing with specific problems, not only will they have more computing power, but also faster computing speeds. That's because quantum computers can process multiple qubits in parallel, unlike digital computers that can only operate sequentially.

What Technical Challenges will there be in Developing Quantum Computing?

  • Maintenance of stable quantum state:
    Delicate quantum states are very susceptible to disturbances by vibrational or electromagnetic fields, or even general thermal disturbances, so today's quantum computers need to operate at ultra-low temperatures close to absolute zero. In addition to increasing the number of qubits, the main technical bottleneck at present is how to maintain a stable quantum state, so that the quantum remains in a certain quantum state for a long enough time to complete the operation and increase the accuracy of the operation. Using the braided tangle method makes the qubits resistant to external interference and makes the qubits as stable as the knots. In this way, the computing power of the quantum computer will no longer be wasted on correcting errors.
  • Scalability of qubits:
    Another key to enabling quantum computers to enter practical applications is the scalability of qubits. Silicon spin quantum, one of the current mainstream quantum computing technologies, is due to the use of already mature semiconductor technology. It is easy to expand upwards in the future, attracting intel and other researchers to invest in R&D. The Princeton university lab recently made a key technological breakthrough in silicon quantum components, producing silicon-based components that can accurately control the quantum behavior between two electrons with extremely low error rates. This ground-breaking qubit logic gate, made of highly ordered silicon crystals lined with tens of nanometers of aluminum oxide wires, delivers voltage and traps two electrons separated by energy levels. Specific quantum dots, and then use the short-term lowering of the energy level gap, enable two electrons to exchange information with each other and achieve a state of quantum entanglement. This research is the first time that quantum entanglement has been successfully achieved in silicon. Researchers can use magnetic fields to control the behavior of qubits. At present, the stability of control electron quantum states is 99%, and the reliability of logic gates is 75%. In addition to the scalability of this technology, the error rate may decrease in the future.
  • Quantum software research and development:
    To make quantum computers truly effective, experts believe that quantum software should be developed in parallel. The complexity and difficulty of quantum computing programs originate from the nature of quantum computers, and there will be a certain degree of noise during operations. Therefore, the physical principles and bit limitations of quantum computers must be considered when programming and noise need to be pre-built mock the model to deal with the correctness of operations. 91ÊÓÆµ¹ÙÍøever, since the computing hardware design of the early developed quantum computers has not yet been unified, they will have nuances of different properties, and the software needs to be customized to a certain extent. The high complexity of operations will also drive the demand for new algorithms and development tools. Quantum computer software designers need to have profound knowledge of physics, mathematics, and software engineering. The cultivation of talents with in-depth knowledge in various fields will be an important task. The key to software research and development, and many quanta software have open-source community development platforms, to accelerate early software development with collective efforts and resources.

The Impact of Quantum Computers on Society?

  • Combination of a quantum computer and artificial intelligence:
    The strengths of quantum computers lie in generating random numbers, finding the minimum value of an unsorted sequence, solving node connection problems in graph theory, and matching characteristics. Scientists have designed a variety of quantum algorithms to solve problems that are difficult for traditional computers to solve. Quantum algorithms can quickly solve multi-degree-of-freedom, huge linear algebra problems, and machine learning relies heavily on this type of linear algebra operation. Therefore, experts soon began to try to combine quantum algorithms and machine learning. Machine learning is a handful of fields that can find niches in the early days of quantum computing. Although traditional machine learning will still start to be practically applied in the transportation, medical and financial markets in the short term. Quantum systems will have a greater advantage in generating real random numbers and processing non-traditional binary data, such as traditional common applications. Monte Carlo machine learning algorithms for financial markets need to generate real random numbers to perform optimally. At this time, the strengths of quantum computers can be demonstrated. Many quantum machine learning startups have begun to develop how to use quantum systems to accelerate machine learning, and their market potential has attracted a lot of capital.
  • Application of quantum computers in chemistry and pharmacy:
    General experts generally believe that chemistry will be the strongest and most immediate application of quantum computing. Quantum computers will be used to help design catalysts for clean energy, understand enzymes in living organisms, and discover new materials for solar cells or high-temperature superconductors. Its advantage is that it exceeds the powerful computing power of existing traditional computers, which is enough to simulate and create complex interaction models of electrons and molecules. Generally, when simulating chemical reactions, it is necessary to understand the interaction of atoms contained in each molecule, and it is necessary to calculate each electron interaction energy of an atom, including the positions and energy levels of all electrons. When the existing traditional computer has 125 orbits, it needs a memory that exceeds the number of all atoms in the universe to store all the information, and cannot process such a large amount of complex data and calculations. Therefore, when current quantum chemists build models, they often must deliberately omit some behavioral characteristics of electrons, especially in the case of strong interactions between electrons. This approximation algorithm is acceptable when simulating organic chemical molecules, but in metal molecules in this example of many electrons squeezed into a small space, the strong interaction between electrons is its essence. If it is ignored, it is impossible to truly understand the actual chemical principle. Examples of similar traditional methods that cannot be simplified include high-temperature superconductor materials, Metal-containing enzyme active sites, etc. 91ÊÓÆµ¹ÙÍøever, the superposition characteristics of qubits enable quantum computers to easily perform such operations, making great contributions to the research and development of new drugs and new materials. Once the technology is mature, the early stage of new drug research and development will be able to simulate the structure of compounds and enzymes in vivo through quantum computers. The interaction of receptors, better prediction of efficacy and side effects, reduced development time and cost, and manufacturers who are familiar with and understand how to use quantum computing will have an advantage in new drug design.
  • Threats of quantum computers to the security of the Bitcoin market and blockchain:
    The security of the virtual currency bitcoin and other applications using blockchain technology lies in its high encryption strength, which is not easy to be cracked by traditional computers. When quantum computer technology that is good at complex operations and password cracking gradually matures, will it Threats to these applications? For example, the current Bitcoin protocol uses the generation of a specific random number (nonce) as one of the necessary conditions for the generation of a new blockchain, and the generation of this random number requires a lot of computing power. Miner¡¯s mining is to provide computing power and obtain Bitcoin as a reward. 91ÊÓÆµ¹ÙÍøever, occasionally two groups of miners will announce two different blocks. At this time, the Bitcoin protocol will focus on the block that has completed more operations and discard the other backward block, which will lead to most operations in the network. The capable miners always get the next block and become the masters who control the Bitcoin ledger. If quantum computers join the mining ranks and demonstrate overwhelming computing power beyond other miners, the entire bitcoin market could collapse. Comparing the prediction of the computing power of quantum computers in the next ten years with the growth of the computing power of circuits currently used for mining. It is found that the existing hardware can still have an advantage in speed in the next ten years, and quantum computers will dominate Bitcoin mining. The situation should not happen immediately.
    91ÊÓÆµ¹ÙÍøever, another security protocol feature of Bitcoin, the elliptic curve signature, may expose weaknesses faster under quantum computing. The owner of Bitcoin will hold a private key and release a public key. In the case of, use the public key to prove that you are the owner of the bitcoin, and the public key can be easily generated from the private key, but not vice versa. Although it is difficult for traditional computers to calculate the private key from the public key, it is easy for quantum computers, and it is estimated that this security agreement may be broken. Although Bitcoin and other virtual currencies have not yet become popular, their transaction popularity and market acceptance are increasing day by day. When the financial market gradually begins to accept and try to build a digital trading platform based on password protection, quantum computing technology has a great impact on the blockchain. The threat and the impact on the future financial market cannot be underestimated. In the foreseeable future, this battle between the spear and the shield will become more and more intense with the gradual maturity of quantum computing and the popularization of blockchain technology.
Published by Sep 22, 2022 Source :

Further reading

You might also be interested in ...

Headline
Trend
The Path to Upgrading Metal Fabrication: Digital Transformation, Low-Carbon Challenges, and Global Opportunities
Facing resource- and energy-intensive production processes, the metal fabrication industry must harness smart manufacturing and automation¡ªdeploying CNC machining, robotic arms, and AI monitoring¡ªto cut costs and errors while enhancing precision and delivery reliability. Integration of ERP, MES, and APS platforms increases process transparency and enables real-time scheduling adjustments, forming a seamless data and management loop. It¡¯s recommended to support this with global market size data and figures on rising automation investments to boost credibility.
Headline
Trend
Urgent Need for Low-Carbon Transformation in the Metal Fabrication Industry
The urgent need for low-carbon transformation is especially pronounced in the metal fabrication industry, which has long been resource- and energy-intensive with high carbon emissions, making it a key sector for addressing climate change and global carbon neutrality goals.
Headline
Trend
The Multifaceted Innovative Impact of Microfactories on the Manufacturing Industry
Compared to traditional large factories, microfactories have lower investment costs and modular design advantages. Equipment and production units can be quickly replicated and replaced, reducing downtime and maintenance costs, enabling companies to respond more flexibly to market changes and product adjustments. Moreover, microfactories can shorten time-to-market by quickly responding to market demands and technological innovations. Through modular design and digitized production processes, new product development and market introduction speed up significantly, offering a clear advantage in competitive markets.
Headline
Trend
Trends in Advanced Material Processing Technologies and High-Precision Machine Tool Development
In aerospace, automotive, and high-performance manufacturing industries, advanced alloys (such as titanium alloys and nickel-based superalloys) and composites (such as thermoplastic carbon fiber composites) are becoming mainstream due to their lightweight, high strength, and high-temperature resistance. By 2025, the global aerospace composite market is expected to expand rapidly with an annual compound growth rate of about 13.9%, driven by the demand for environmental protection and net-zero emissions, which will further innovate and apply thermoplastic composite technologies. These new materials present challenges such as high hardness, tool wear, heat management, and processing deformation control, requiring processing equipment to have higher rigidity, precision, and thermal stability. Additionally, the production process's demand for rapid prototyping, modular assembly, and recycling drives the simultaneous upgrading of materials and equipment.
Headline
Trend
Intelligent Oil Mist Purification Technology for Machine Tools: From Air Cleaning to Smart Factory Accelerator
As CNC machining and precision metal processing continue to grow, machine tools release large amounts of oil mist, atomized coolant droplets, smoke, and fine oil particles during operation. Prolonged exposure to such environments not only endangers operator health but also affects machine accuracy and maintenance costs. Therefore, highly efficient oil mist filtration equipment has become an essential asset in modern machining facilities.
Headline
Trend
Oil Mist Filtration: Creating Safer Workplaces
In industrial machining processes, the generation of oil smoke and fine oil mist is unavoidable. Without effective collection and filtration, these airborne contaminants pose serious health risks to workers, increasing the likelihood of respiratory diseases and occupational illnesses. At the same time, accumulated oil smoke not only pollutes the work environment and degrades air quality but also accelerates wear and malfunction of machinery, resulting in higher maintenance costs. Furthermore, the presence of flammable oil mist increases the risk of fire hazards, endangering factory safety. To ensure stable, safe production that complies with regulations, oil smoke collection systems have become an essential protective measure in modern smart manufacturing¡ªsafeguarding employee health while enhancing equipment efficiency and environmental quality.
Headline
Trend
EU Rules and Taiwan¡¯s Textile Sustainability Shift
In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
Headline
Trend
New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
Headline
Trend
Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
Headline
Trend
Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
Headline
Trend
CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
Headline
Trend
Global Competitiveness of Taiwan¡¯s Lathe Industry
As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
Agree