91Ƶ

Precautions for Electric Bicycles
Knowledge

Precautions for Electric Bicycles

After experiencing many times of technological innovations, energy crises, and the rise of environmental awareness, the bicycle industry has also followed the trend and changed.
Published: Dec 20, 2022
Precautions for Electric Bicycles

With the technology change, the structure of the current electric assist bicycle has matured a lot. The five components of electric-assisted bicycles are controllers, motors, sensors, batteries, and display interfaces. This can be further subdivided into cable connectors, torque sensors, speed sensors, battery management devices, electronic devices such as vehicle management systems, transmission devices, user control interfaces, and electric transmissions making the power assist technology of electric assist bicycles more and more complete.

Precautions for Electric Bicycles (e-bike):

1. Battery:

Rechargeable batteries are the equipment for all-electric vehicles to store electricity. The common forms of rechargeable batteries on the market can be divided into lead-acid batteries and lithium-ion batteries. 91Ƶever, lead-acid batteries are not easy to maintain because of their memory effect, volume and weight. It is large and releases a small amount of toxic gas when charging, so it is rare to use this type of battery in the market; lithium-ion batteries are common in the field of consumer electronics, with high energy density and no memory effect, and only slow charge loss when not in use. In addition to consumer electronics products, increasingly advanced lithium-ion batteries are becoming more and more popular, such as electric vehicles and drones also use lithium batteries as energy storage devices. Although lithium-ion batteries have advantages in energy storage, they may cause fire or explosion when overcharged or over-discharged. Therefore, when choosing a vehicle, it is important to choose a high-quality battery with a qualified label.

Batteries are consumables. After charging and discharging times reach a certain level, the storable power will be greatly reduced to less than half. 91Ƶever, if you do not replace the battery with a new one, it will affect the battery life of your car. The best way to evaluate is to convert the required battery capacity based on the average weekly driving distance and choose a battery that meets the required storage capacity.

2. Battery Capacity and Motor Power:

The voltage and capacity of the rechargeable battery are related to the performance and endurance of the car and are important parts that affect the cost of the car. The 10Ah and 20Ah marked on the top of the battery refer to the electric capacity of the battery. If the battery capacity is 10Ah, it means that the motor uses electricity the power consumption rate is 10A (ampere). The battery can be used continuously for 1 hour. If the power consumption rate of the motor is 5A, it can be used continuously for 2 hours.

Common battery specifications on the market are generally divided into 24V, 36V, 48V, 60V standard voltage, and 5AH, 10AH, 12AH, 15AH, 20AH, 22AH, 30AH and other standard capacities. The higher the battery capacity, the longer the cruising range will be. The distance traveled on a full charge is longer.

Brushless DC Motors are durable and efficient. When purchasing, be sure to ask whether the motor is brushless. Electric assist bicycle motors on the market are often marked with power, such as 250W, 350W, 500W, 800W, 1000W, 1200W, etc. The higher the power of the motor larger means better the performance of the car, and the more common configurations are 250W and 350W cars.

3. Field of Use:

When you choose a car model, you must first consider the purpose of the car, because cars with different purposes will have great differences in parts settings, among which the tire size is the most critical.

20-22 inches - Shuttle in the city:

Recommended for you and your female friends and seniors who live in the city. It has a low center of gravity and a small turning radius, making it relatively lightweight, making it ideal for navigating the streets of the city. If you choose a wider tire, the friction force will be greater when accelerating the bicycle, and it will consume more power. It will be easier to start, and it will save effort and energy when going uphill.

  • The best choice in the metropolitan area.
  • Low center of gravity and good stability.
  • The cornering radius is small, and the body is light.
24-26 inches - long travel:

Bicycle tires are big, so they have an advantage in speed. They are especially suitable for long-distance travel. If you add bags or shelves to carry equipment, it will be more suitable for friends who often need to carry supplies during commuting or long-distance travel.

Because the performance of electric-assisted bicycles is good and the speed is fast, safety is the greatest consideration. It is recommended to use tires with obvious deep tooth structure, large tooth pattern spacing, and good grip ability, which will bring a certain degree of shock absorption. The all-around mountain bike tire with the effect is better, and it is suitable for ordinary mountain cross-country road riding.

  • It is not difficult to ride long distances and climb up the mountain.
  • It is more suitable for friends who are not in the good physical condition and want to ride long distances.
Body folding function:

Compared with traditional bicycles, electric-assisted bicycles have added batteries and motors, so the weight is generally not too light. But if it has a folding function, it can still increase a lot of practicality, such as putting the electric-assisted bicycle indoors or storing it behind the car in the suitcase, the space required for storage can be reduced after the bicycle is folded, whether it is stored in the storage room, living room or the rear compartment, it will be much more convenient.

4. Is there a Torque Meter?

As the name suggests, an electric-assisted bicycle is a bicycle with auxiliary power. A good power-assisted system allows you to climb mountains and slopes, while a bad power-assisted system makes you ride harder. Currently, there are two types of power assist systems on electric vehicles on the market:

  • The first one is equipped with a Torque sensor. This device can detect how much pressure the rider is stepping on the pedals, and then operate the motor to provide corresponding auxiliary power according to the precise algorithm. This method is friendly and well-designed. The system even makes the rider feel that there is no auxiliary power. Whether you are going uphill or on a flat road, you can get enough power to drive smoothly all the way. 91Ƶever, the price of the car with this device is relatively high and belongs to the high-end car.
  • The second type is equipped with a speed-detection device. The device is made of simple magnetic materials. This device is used to detect the number of revolutions of the front chainring and uses the speed of the front chainring and a simple algorithm to determine the rotation speed. The amount of power assistance is provided, but there is a problem with this device. When you go uphill and get closer to the high slope, the speed of the vehicle will drop significantly, and the pedal speed will also change slowly. At this time, the power assist will be lost relatively, and the rider needs to use more If you step on the pedals to move the car with enough strength, you will feel very strenuous and even out of breath at this time. But this device is simple and cheap, so most low-end cars will use this device.

5. Is there a Lightning Mark?

When purchasing an electric-assisted bicycle, it is best to confirm whether the product has a qualified mark. It must pass the national safety test (CNS14126), and must pass the inspection of the Ministry of Communications, and have a qualified mark before it can be legally used on the road. In addition, electric-assisted bicycles are different from ordinary bicycles. Subsequent maintenance issues must be considered when purchasing. It is wise to choose a brand manufacturer with a complete maintenance system. Ask about the follow-up after-sales service conditions. It is recommended in the process of choosing a vehicle You should test drive it before you can find the car that suits you best.

Published by Dec 20, 2022 Source :

Further reading

You might also be interested in ...

Headline
Knowledge
The Distinction Between Yogurt and Probiotics
When you enjoy a sweet cup of yogurt every morning, do you believe you've provided your gut with a sufficient dose of good bacteria? Many people often equate yogurt with probiotics, thinking they are one and the same. 91Ƶever, from the perspective of their product nature and function, yogurt is more like a delicious "fermented beverage," while probiotics are "functional health supplements" designed to address specific health concerns. This article will break down the fundamental differences between the two, helping you become a smarter consumer.
Headline
Knowledge
The Birth of a Fabric: The Science and Craft of Textiles
Although fabric may seem like an ordinary item in our daily lives, its creation involves complex and highly precise processes. From cotton grown in the fields to synthetic fibers produced in factories, each raw material carries unique properties and purposes. Whether its the light, airy touch of a shirt or the high protective performance of medical textiles, behind it lies a production chain that spans agriculture, chemistry, and engineering.
Headline
Knowledge
Exploring Major Types of Plastics and Their Properties
Plastic materials are indispensable raw materials in modern manufacturing. Based on their chemical structures and processing characteristics, plastics are mainly classified into two categories: thermoplastics and thermosets. Understanding the properties of these two types aids in material selection and product design, thereby enhancing manufacturing efficiency and product performance.
Headline
Knowledge
Analysis of Green Plastic Manufacturing
With the rise of environmental awareness and the global push for sustainable development goals, traditional plastics face increasing environmental pressure due to their challenges in decomposition and recycling. In response, the manufacturing industry is actively developing and applying eco-friendly plastic materials to build green manufacturing systems. This article explores the types, characteristics, and industrial applications of eco-friendly plastics to assist industry transformation and upgrading.
Headline
Knowledge
Key Parameters for Manufacturing High-Quality Plastic Products
Plastic materials are widely used across various industries due to their lightweight, ease of molding, and versatile properties. 91Ƶever, different types of plastics exhibit distinct mechanical, thermal, chemical, and dimensional stability characteristics, which directly affect the final products performance and service life. Therefore, understanding the performance indicators of plastics is fundamental to designing and manufacturing high-quality plastic products.
Headline
Knowledge
Dry Cutting vs. Wet Cutting: The Balance of Energy Saving, Cost, and Quality
In CNC machining, the choice of cooling method is not simply a technical preference but a multi-faceted trade-off involving cost control, machining quality, tool life, and production line stability. Both dry cutting and wet cutting have their advantages and limitations. To stand out in the fiercely competitive market, companies must shift from pursuing the theoretically optimal to the contextually optimal solution.
Headline
Knowledge
The Unsung Heroes of Cutting Tool Coatings: Performance Differences from TiN to DLC
In CNC machining, cutting tool coatings are a critical yet invisible factor in boosting production efficiency and reducing costs. Although coating thickness is only a few microns, it significantly enhances tool hardness and wear resistance, optimizes heat dissipation, and improves cutting speed and machining accuracy. From classic Titanium Nitride (TiN) to advanced Diamond-Like Carbon (DLC) coatings, different coating materials not only offer varying hardness and heat resistance but also affect tool lifespan and machining adaptability.
Headline
Knowledge
Comprehensive Overview of Plastic Processing Methods: Mastering Key Technologies and Applications
Plastic products play an indispensable role in modern manufacturing, and various plastic processing techniques are crucial for achieving product diversity and efficient production. The following introduces five common and important plastic processing methods, helping readers gain a thorough understanding of their principles, features, and application scopes.
Headline
Knowledge
Fabric Knowledge Base: A Guide to Fiber Applications, From Beginner to Expert Selection
Textile fiber is the fundamental element that determines fabric performance and product suitability. Whether you are a designer, manufacturer, or consumer, understanding the unique characteristics of different fibers and their suitable applications is crucial for precise material selection and informed purchasing. This article will systematically introduce the applications of major natural and synthetic fibers and explain how blending them can overcome the limitations of single fibers, providing versatile functional solutions and helping you build a comprehensive knowledge base of textile applications.
Headline
Knowledge
What is Liquid Injection Molding?
Liquid Injection Molding (LIM) is a manufacturing process that involves injecting liquid silicone rubber (LSR) into precision molds, followed by heating and curing to form high-precision, complex plastic components. Compared to traditional thermoplastic injection molding, LIM offers superior accuracy and the capability to produce more intricate shapes, making it especially suitable for applications demanding high performance and reliability.
Headline
Knowledge
Precision Mold Development and Manufacturing: The Core Technology of Modern Plastic Production
Precision molds form the foundation for the quality and efficiency of plastic part molding. In todays highly competitive manufacturing environment, the design and fabrication of molds directly impact a products functional performance and market competitiveness. Excellent mold development requires not only precise engineering design but also the integration of advanced machining technologies and rigorous quality control to achieve efficient and stable mass production.
Headline
Knowledge
The Magical Journey of Milk Tea
Pouring smooth, rich milk into robust black tea with a unique aroma, then stirring it all together, gets you a cup of milk tea. But do you really know what defines milk tea, and how it differs from the milk tea we enjoy today?
Agree