91ÊÓÆµ¹ÙÍø

In The Decade Ahead, A Combination of Technologies Will Take Important Strides, Forward
Trend

In The Decade Ahead, A Combination of Technologies Will Take Important Strides, Forward

As discussed in Tech Trends 2019: Beyond the Digital Frontier, technology forces that are increasingly dependent on advanced connectivity capabilities also are reshaping enterprise architecture.
Published: Jul 21, 2020
In The Decade Ahead, A Combination of Technologies Will Take Important Strides, Forward

Proliferating mobile devices and sensors (commonly associated with the Internet of Things), autoscaling with serverless computing, AI, and automation that rely on exploding volumes of shared data require differentiated connectivity capabilities to achieve their transformative digital potential.

Existing connectivity technologies are expanding their reach as networks are built out and adoption grows. At the same time, the next generations of these technologies are appearing, with upgraded standards. Both of these trends are expanding and improving what we refer to as ¡°advanced connectivity.¡± Besides, a new type of more revolutionary (and more capital-intensive) ¡°frontier connectivity¡± is emerging, although it is likely to have a more limited geographic footprint in the decade ahead, barring the mass-market deployment of satellite coverage.

Advanced Connectivity Technology:

Existing connectivity technologies continue to proliferate and evolve, from backbone networks to the last mile that meets the end-user. In the network, for instance, providers are upgrading existing 4G infrastructure with low- to mid-frequency ¡°non-standalone¡± 5G network overlay.1 The results of these upgrades will vary significantly depending on the spectrum used and the density of supporting infrastructure such as cell towers. But in general, these low- to mid-frequency 5G networks can offer significant improvements in speed and latency while supporting a greater density of connected devices. Meanwhile, fiber optic networks continue to expand, and the introduction of the new DOCSIS 3.X standard promises to bring the performance of cable broadband closer to that of fiber¡ªand to do so over existing infrastructure. In the last mile of access, the next generation of Wi-Fi (Wi-Fi 6) will improve speeds while supporting many more connected devices. Technologies that use radio signals for tagging, tracking, and contactless short-range communication between devices (such as Bluetooth, NFC, and RFID sensors) are becoming more sophisticated. Low-power wide-area networks (LPWANs, with competing standards such as LoRa, NB-IoT, and SigFox) provide connectivity over broader areas and longer ranges. All of these technologies continue to improve in terms of affordability, functionality, and adoption.

Frontier Connectivity Technology:

Frontier technologies like high-band 5G and low-earth orbit satellite constellations represent a more radical departure.2 Designed to be the most ultra-fast mobile option, high-band 5G (often in the form of standalone 5G) promises to put the speed, latency, reliability, and security of fiber in the air, expanding what mobile devices can do. It offers a significant step-change in overall network performance from low- to mid-band 5G. Low-earth orbit (LEO) satellites could also deliver a breakthrough¡ªnot necessarily in network performance but in the breadth of coverage. By essentially beaming broadband down from space, they could bring coverage to remote parts of the world where the economics do not work for laying fiber or building networks of towers. 91ÊÓÆµ¹ÙÍøever, providing coverage requires a constellation of many satellites orbiting at once, making viability uncertain. OneWeb and SpaceX are the only companies to launch test satellites (as of this writing), and no commercial services are yet available.

The advances described above are occurring alongside an expansion of hardware and software capabilities. Cloud computing will provide a processing backbone and storage capacity for use cases that require significant computational power. Edge computing will do the same while removing latency limitations. The new architecture of connectivity will also include private corporate networks. These connectivity and computing advances will enable cheaper and much more efficient ¡°thin¡± devices connecting with the cloud and localized servers; they could become mainstream at the end of the decade for both consumers and businesses.

The promise of 5G has captured the attention of business leaders, policymakers, and the media. But how much of that promise is likely to be realized anytime soon?

With the first true high-band 5G networks already live, we set out to gain a realistic view of how and where connectivity could be deployed and what it can enable over the next 10 years. But 5G is not appearing in isolation. A new discussion paper, Connected World: An evolution in connectivity beyond the 5G evolution (PDF¨C10.3MB), takes a more expansive look that ranges from fiber and satellites to Wi-Fi and short-range technologies.

Beyond the implications for industry, connectivity also has ramifications for equity and society. Enabling more people to plug into global flows of information, communication, and services could add another $1.5 trillion to $2 trillion to GDP. Although gaps will remain, this trend could unlock greater human potential and prosperity in many developing nations.

Published by Jul 21, 2020 Source : Source :

Further reading

You might also be interested in ...

Headline
Trend
The Path to Upgrading Metal Fabrication: Digital Transformation, Low-Carbon Challenges, and Global Opportunities
Facing resource- and energy-intensive production processes, the metal fabrication industry must harness smart manufacturing and automation¡ªdeploying CNC machining, robotic arms, and AI monitoring¡ªto cut costs and errors while enhancing precision and delivery reliability. Integration of ERP, MES, and APS platforms increases process transparency and enables real-time scheduling adjustments, forming a seamless data and management loop. It¡¯s recommended to support this with global market size data and figures on rising automation investments to boost credibility.
Headline
Trend
Urgent Need for Low-Carbon Transformation in the Metal Fabrication Industry
The urgent need for low-carbon transformation is especially pronounced in the metal fabrication industry, which has long been resource- and energy-intensive with high carbon emissions, making it a key sector for addressing climate change and global carbon neutrality goals.
Headline
Trend
The Multifaceted Innovative Impact of Microfactories on the Manufacturing Industry
Compared to traditional large factories, microfactories have lower investment costs and modular design advantages. Equipment and production units can be quickly replicated and replaced, reducing downtime and maintenance costs, enabling companies to respond more flexibly to market changes and product adjustments. Moreover, microfactories can shorten time-to-market by quickly responding to market demands and technological innovations. Through modular design and digitized production processes, new product development and market introduction speed up significantly, offering a clear advantage in competitive markets.
Headline
Trend
Trends in Advanced Material Processing Technologies and High-Precision Machine Tool Development
In aerospace, automotive, and high-performance manufacturing industries, advanced alloys (such as titanium alloys and nickel-based superalloys) and composites (such as thermoplastic carbon fiber composites) are becoming mainstream due to their lightweight, high strength, and high-temperature resistance. By 2025, the global aerospace composite market is expected to expand rapidly with an annual compound growth rate of about 13.9%, driven by the demand for environmental protection and net-zero emissions, which will further innovate and apply thermoplastic composite technologies. These new materials present challenges such as high hardness, tool wear, heat management, and processing deformation control, requiring processing equipment to have higher rigidity, precision, and thermal stability. Additionally, the production process's demand for rapid prototyping, modular assembly, and recycling drives the simultaneous upgrading of materials and equipment.
Headline
Trend
Intelligent Oil Mist Purification Technology for Machine Tools: From Air Cleaning to Smart Factory Accelerator
As CNC machining and precision metal processing continue to grow, machine tools release large amounts of oil mist, atomized coolant droplets, smoke, and fine oil particles during operation. Prolonged exposure to such environments not only endangers operator health but also affects machine accuracy and maintenance costs. Therefore, highly efficient oil mist filtration equipment has become an essential asset in modern machining facilities.
Headline
Trend
Oil Mist Filtration: Creating Safer Workplaces
In industrial machining processes, the generation of oil smoke and fine oil mist is unavoidable. Without effective collection and filtration, these airborne contaminants pose serious health risks to workers, increasing the likelihood of respiratory diseases and occupational illnesses. At the same time, accumulated oil smoke not only pollutes the work environment and degrades air quality but also accelerates wear and malfunction of machinery, resulting in higher maintenance costs. Furthermore, the presence of flammable oil mist increases the risk of fire hazards, endangering factory safety. To ensure stable, safe production that complies with regulations, oil smoke collection systems have become an essential protective measure in modern smart manufacturing¡ªsafeguarding employee health while enhancing equipment efficiency and environmental quality.
Headline
Trend
EU Rules and Taiwan¡¯s Textile Sustainability Shift
In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
Headline
Trend
New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
Headline
Trend
Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
Headline
Trend
Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
Headline
Trend
CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
Headline
Trend
Global Competitiveness of Taiwan¡¯s Lathe Industry
As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
Agree