91ÊÓƵ¹ÙÍø

The so-called broach refers to the order of size, the rough cutter and the fine cutter. Most of the cutters are mainly installed on the broaching machine, which is called the broach. Broach is a forming tool used for broaching. There are multiple rows of cutter teeth on the surface of the cutter, and the size and shape of each row of cutter teeth increase and change sequentially from the cutting end to the cutting end. When the broach makes a broaching motion, each tooth cuts a certain thickness of metal from the workpiece, and finally obtains the required size and shape.

Edge Computing is a distributed network architecture that allows data to be processed and analyzed closer to its source, moving resources such as computing, storage, and network bandwidth as close to users (or endpoints) as possible. Industrial Internet of Things (IIoT), artificial intelligence, big data analysis to 5G networks, edge computing can be said to be the expansion and extension of IT environments and computing technologies that seek common ground in differences.

A pair of molds is composed of an upper mold and a lower mold. The male die is a concave die, also known as the upper die. The design of the male mold is very important, and the structural characteristics of the female mold itself change with the structure of the product and the processing method of the mold, which is flexible.

The five-axis controller is the core of the five-axis processing machine, which is used to control the trajectory of the five-axis simultaneous motion and the compensation of the motion.

There is more than one type of laser cutting. It can use different medias to generate lasers of different wavelengths, so the scope, characteristics and functions of the applications are different. In the following, the article will take you to understand the uses of laser cutting in different fields, so that you can better understand the laser cutting technology.

With the rapid development of the iron and steel industry, the iron steel industry has gradually shown contradictions such as insufficient natural resources, excessive energy consumption per ton of output, and environmental pollution. As the second mining industry of the iron and steel industry, scrap steel resources have the advantages of saving energy, reducing pollution, protecting the environment, recycling, etc., and its influence will be increasing.

A punch, also known as a punch press, is a forming process technology. There are many kinds of it. Due to different structural principles, the price and processing effect will change in response, but they all have the same structure. With the rapid development of the stamping industry, competition in all walks of life has increased. "Punches are also used in various industries, such as aerospace, education, auto parts, diving equipment and so on.

An injection mold is a tool for producing plastic products; it is also a tool for imparting complete structure and precise dimensions to plastic products. Because the production method is to inject the plastic melted at high temperature into the mold through high pressure and mechanical drive.

A method of transmitting rotational force between two separated shafts using pulleys and belts. The rotation speed ratio is inversely proportional to the diameter of the two pulleys, and it can slide when the load is excessive to prevent mechanical damage.

Welding refers to the joining or fusing of workpieces by heating and/or compression to form a continuum. The fusion of weldments can be based entirely on the heat generated by the arc to fuse the weldments.