91ÊÓÆµ¹ÙÍø

What Is Artificial Intelligence? Future Trends
Trend

What Is Artificial Intelligence? Future Trends

What is Artificial Intelligence (AI)? At present, in which life scenarios has artificial intelligence been used? 91ÊÓÆµ¹ÙÍø will it change the future? Artificial intelligence is the power of the new era. In the future, there will be no modern industries that have nothing to do with artificial intelligence. Artificial intelligence (AI) has illuminated the prospects of a new generation of technology. Since then, people have quickly used huge amounts of data to analyze and carry out machine learning. solution, leading to the best decision. 91ÊÓÆµ¹ÙÍø does this technology work and drive the development of other new technologies? What are the development trends of artificial intelligence?
Published: Sep 05, 2022
What Is Artificial Intelligence? Future Trends

What is Artificial Intelligence AI?

What is Artificial Intelligence (AI)? The definition of AI artificial intelligence is to enable systems or computer equipment to have the ability to simulate human thinking patterns, logic and behavior, and to continuously correct and evolve through the process of data analysis. Simply put, artificial intelligence is a technology that allows computers to think and execute strategies as human as possible.

Since humans can think, why do we need artificial intelligence? In fact, the ability of humans to further interpret and analyze data is no longer comparable to the existing huge amount of data - at this time, artificial intelligence can be hired to do it. Artificial intelligence goes through the stages of perception, learning, reasoning, and correction, digs deep into a large amount of data, performs complex and tedious tasks, and helps humans break through limitations and cross the boundaries of past research and applications.

The world has experienced three waves of artificial intelligence.

  1. The first wave of artificial intelligence (1950 to 1960): Symbolic logic, telling the computer ¡°Human thinking logic"; human beings can't figure out their own thinking process and ultimately fail.
  2. The second wave of artificial intelligence (1980 to 1990): Expert system, telling the computer ¡°All the knowledge of human beings"; human beings can't answer all questions, write rules, and ultimately fail.
  3. The third wave of artificial intelligence (2010-present): machine learning, telling computers ¡°What people see"; in development.

After two setbacks, in the third wave of artificial intelligence, scientists developed a "machine learning" method, which finally made a breakthrough in AI technology. Later, humans found "deep learning" technology from the experience of machine learning, and the third wave of AI began to make great progress.

In the third wave of AI, experts have turned their attention to the fact that graphics processing units (GPUs) are more suitable for deep learning than the central processing units (CPUs) of the past. At the same time, Nvidia, a major GPU manufacturer, has become a powerful assist for deep learning. By improving hardware equipment and exerting powerful computing power, it has helped the explosion of AI deep learning energy.

What is the difference between machine learning and deep learning?

  1. Machine Learning (ML): Humans define features, allowing machines to identify rules by themselves from a large amount of data and experience, and finally make predictions and decisions.
  2. Deep Learning (DL): The computer automatically defines features and finds rules. Deep learning uses multi-layered huge neural networks with more advanced training technology and computing power to learn more complex big data, such as recognizing images and speech.

Six Trends Driving the Future of AI

It is inevitable that artificial intelligence is sweeping industries around the world and changing our lives. 91ÊÓÆµ¹ÙÍøever, under this umbrella of AI, there are six major trends that have been most prominent in recent years.

  1. Rapid Growth of Reinforcement Learning
  2. Since AlphaGo developed by DeepMind defeated the Korean chess player Lee Sedol in Go in 2015, the proportion of reinforcement learning mentioned in artificial intelligence-related research papers has grown from 4.7% at that time to 20% after 2020. Now, reinforcement learning is also gradually creating huge value in various industries. Google's data centers use this technology to reduce energy consumption by more than 50%.

  3. AI-Driven Business Decisions
  4. Although the wisdom of AI is based on data, the so-called AI-driven and data-driven are actually very different. The former focuses on data, while the latter is the ability to process data. Now in 2020, AI is involved in more business decisions that would otherwise be the task of decision makers, ranging from operations, marketing and sales, and even design. Artificial intelligence will gradually become the only link between data and business decisions.

  5. RPA Penetration Increases
  6. Process automation, also known as RPA (Robotic Process Automation), is the most frequent application of artificial intelligence. In a study of 152 AI use cases, it was found that nearly half of the cases in the industry are based on RPA. In recent years, due to the gradual maturity of the technology, the penetration of RPA will greatly increase in most industries, completing many of our existing tasks at a near-zero error and high-efficiency rate.

  7. AI Will No Longer Be So Reliant on Big Data
  8. In the past, training a deep learning model based on neural network often required a very large amount of data, but such data is not so easy to obtain in many fields such as medical treatment. This is why researchers often use certain data augmentation techniques, such as turning the same photo over, to increase the amount of existing data. 91ÊÓÆµ¹ÙÍøever, with the increasing maturity of GAN technology, research in many fields can directly simulate new data, so that many meaningful models can be built in environments with only a small amount of data.

  9. Ethical AI and AI Trustworthiness
  10. Based on our many controversial developments in AI, such as simulating other people's voices and videos, or AI-driven surveillance systems, etc., as well as our fears about the potential of AI, how to humanely develop artificial intelligence technology is also gradually Gain momentum in academic research. Among them, developments such as explainable artificial intelligence and transparent AI decision-making are enhancing the trustworthiness of AI for users and consumers. At the same time, many policies and industrial norms are gradually echoing this trend.

  11. More Relevant Interaction Models
  12. The AI-driven interaction model Cognitive Engagement, often translated as cognitive investment, is driven by breakthroughs in NLP research and the maturity of neural networks, and now has very complete applications in various fields. For example, a chatbot for 24-hour customer service, a product and service recommendation system that provides a personalized experience through communication, or an intelligent assistant that combines an expert system to work with professionals, AI will be used in many fields in the future. interact with users.

Published by Sep 05, 2022 Source :, Source :

Further reading

You might also be interested in ...

Headline
Trend
The Path to Upgrading Metal Fabrication: Digital Transformation, Low-Carbon Challenges, and Global Opportunities
Facing resource- and energy-intensive production processes, the metal fabrication industry must harness smart manufacturing and automation¡ªdeploying CNC machining, robotic arms, and AI monitoring¡ªto cut costs and errors while enhancing precision and delivery reliability. Integration of ERP, MES, and APS platforms increases process transparency and enables real-time scheduling adjustments, forming a seamless data and management loop. It¡¯s recommended to support this with global market size data and figures on rising automation investments to boost credibility.
Headline
Trend
Urgent Need for Low-Carbon Transformation in the Metal Fabrication Industry
The urgent need for low-carbon transformation is especially pronounced in the metal fabrication industry, which has long been resource- and energy-intensive with high carbon emissions, making it a key sector for addressing climate change and global carbon neutrality goals.
Headline
Trend
The Multifaceted Innovative Impact of Microfactories on the Manufacturing Industry
Compared to traditional large factories, microfactories have lower investment costs and modular design advantages. Equipment and production units can be quickly replicated and replaced, reducing downtime and maintenance costs, enabling companies to respond more flexibly to market changes and product adjustments. Moreover, microfactories can shorten time-to-market by quickly responding to market demands and technological innovations. Through modular design and digitized production processes, new product development and market introduction speed up significantly, offering a clear advantage in competitive markets.
Headline
Trend
Trends in Advanced Material Processing Technologies and High-Precision Machine Tool Development
In aerospace, automotive, and high-performance manufacturing industries, advanced alloys (such as titanium alloys and nickel-based superalloys) and composites (such as thermoplastic carbon fiber composites) are becoming mainstream due to their lightweight, high strength, and high-temperature resistance. By 2025, the global aerospace composite market is expected to expand rapidly with an annual compound growth rate of about 13.9%, driven by the demand for environmental protection and net-zero emissions, which will further innovate and apply thermoplastic composite technologies. These new materials present challenges such as high hardness, tool wear, heat management, and processing deformation control, requiring processing equipment to have higher rigidity, precision, and thermal stability. Additionally, the production process's demand for rapid prototyping, modular assembly, and recycling drives the simultaneous upgrading of materials and equipment.
Headline
Trend
Intelligent Oil Mist Purification Technology for Machine Tools: From Air Cleaning to Smart Factory Accelerator
As CNC machining and precision metal processing continue to grow, machine tools release large amounts of oil mist, atomized coolant droplets, smoke, and fine oil particles during operation. Prolonged exposure to such environments not only endangers operator health but also affects machine accuracy and maintenance costs. Therefore, highly efficient oil mist filtration equipment has become an essential asset in modern machining facilities.
Headline
Trend
Oil Mist Filtration: Creating Safer Workplaces
In industrial machining processes, the generation of oil smoke and fine oil mist is unavoidable. Without effective collection and filtration, these airborne contaminants pose serious health risks to workers, increasing the likelihood of respiratory diseases and occupational illnesses. At the same time, accumulated oil smoke not only pollutes the work environment and degrades air quality but also accelerates wear and malfunction of machinery, resulting in higher maintenance costs. Furthermore, the presence of flammable oil mist increases the risk of fire hazards, endangering factory safety. To ensure stable, safe production that complies with regulations, oil smoke collection systems have become an essential protective measure in modern smart manufacturing¡ªsafeguarding employee health while enhancing equipment efficiency and environmental quality.
Headline
Trend
EU Rules and Taiwan¡¯s Textile Sustainability Shift
In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
Headline
Trend
New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
Headline
Trend
Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
Headline
Trend
Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
Headline
Trend
CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
Headline
Trend
Global Competitiveness of Taiwan¡¯s Lathe Industry
As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
Agree