91ÊÓÆµ¹ÙÍø

Innovations in Precision Medicine - AI Surgical Robots and Physician Collaborative Surgery
Trend

Innovations in Precision Medicine - AI Surgical Robots and Physician Collaborative Surgery

With the advent of the AI era, the medical community has begun to use AI data analysis, develop surgical robots, and collaborate with doctors to create innovations in precision medicine.
Published: Mar 15, 2022
Innovations in Precision Medicine - AI Surgical Robots and Physician Collaborative Surgery

New changes in medical surgery-the development of AI surgical robots

With advances being made in medical technology, and clinical requirements becoming more stringent, surgical robots have emerged as a high-accuracy solution for minimally invasive surgeries. With their high stability, flexibility, and precision, robots will be future improved to include the development of hand-eye coordination for minimally invasive surgery.

In the past, humans may have misdiagnosed or made mistakes in surgical procedures due to fatigue or other factors. Now robots can take over. Early and mild symptoms that humans may not notice can be detected by AI to give early warning so that doctors can prescribe the right medicine in advance. AI will not replace humans but will collaborate with humans to create precision medicine. Nowadays, AI surgical robots have already been officially introduced into the operating room to help physicians create lower-risk, safe and efficient surgeries with precision and flexibility.

91ÊÓÆµ¹ÙÍø can AI surgical robots help physicians improve the performance of surgery?

Surgical robots can bring advantages to operations that require precise maneuvers. For example, using a traditional head frame used for head surgeries, a surgical robot can be programmed to perform delicate surgeries. Electrodes are implanted at the target position, and instruments can be maneuvered in relationship to the electrode positions, reducing the risk of human error. Combining AI surgical robots with 3D scanning application data allows operations to be completed with high precision and low error. During automated robotic procedures, the doctor can pay more attention to the patient's condition, and more efficiently complete the operation.

Traditional surgical operations can be time-consuming, causing pressure on the surgeon to perform the surgery quickly, resulting in errors. With the assistance of robots, the operating time is shortened, thereby reducing risk during surgery. The entire medical team¡¯s efficiency can be improved, and risks due to extended time under general anesthesia can be reduced, leading to a higher probability of successful surgery. Family members are also spared from the anxiety of a long waiting time during surgery.

Equipped with computer vision, automatic navigation, and AI analysis technologies, there are many potential development possibilities for surgical robots:

For deep brain stimulation surgery, the room for error that in traditional surgery is about 2 mm ¨C 10 mm, but surgical robots can limit the error to within 0.5 mm, improving the accuracy of the entire surgery.

Current state-of-the-art, mechanical, minimally invasive surgical systems are composed of three parts: A surgical robotic arm, a 3D endoscope, and a console. The 3D endoscope provides ultra-high-resolution, with a 3D field of view, giving accurate determination of distances and positions of objects, allowing the robotic arm to perform accurate operations. The robotic arm can imitate human beings to perform subtle movements such as rotation and gripping. It can perform delicate surgeries in a small spaces, as well as assist in the incision and suture of the operation. Accurate operations can also reduce scars, for better cosmetic results.

With robot-assisted surgery, the medical team's grasp of the situation during the entire surgical procedure will be relatively improved. Through automated operation using surgical robots, the lengthy surgery time typical in the past has been shortened substantially, reducing the burden on patients during the operation. With further integration of technologies, surgical robots will be able to use computer vision, automatic navigation, artificial intelligence and data analysis to complete more precise surgical operations, further reducing human errors.

Prospects for the development of surgical robots:

Work presently being performed by surgical robots is based on medical technology developed over the past few decades. With the improvements in precision and stability of surgical robots, doctors have been freed to focus more on the overall operation to obtain better medical diagnosis and medical quality.

The application of surgical robots has brought innovation to traditional surgery, and the scope of application has become more and more extensive. 91ÊÓÆµ¹ÙÍøever, the high cost of surgical robots, national health insurance policies, and the high cost of consumables have limited their market development. But then the minimally invasive nature and quick postoperative recovery times resulting from the use of surgical robots can allow patients to be discharged early, reducing costs and the risk of postoperative recurrence. With the further development of medical technology, surgical robots will surely bring more convenience to the medical industry.


Published by Mar 15, 2022 Source :

Further reading

You might also be interested in ...

Headline
Trend
The Path to Upgrading Metal Fabrication: Digital Transformation, Low-Carbon Challenges, and Global Opportunities
Facing resource- and energy-intensive production processes, the metal fabrication industry must harness smart manufacturing and automation¡ªdeploying CNC machining, robotic arms, and AI monitoring¡ªto cut costs and errors while enhancing precision and delivery reliability. Integration of ERP, MES, and APS platforms increases process transparency and enables real-time scheduling adjustments, forming a seamless data and management loop. It¡¯s recommended to support this with global market size data and figures on rising automation investments to boost credibility.
Headline
Trend
Urgent Need for Low-Carbon Transformation in the Metal Fabrication Industry
The urgent need for low-carbon transformation is especially pronounced in the metal fabrication industry, which has long been resource- and energy-intensive with high carbon emissions, making it a key sector for addressing climate change and global carbon neutrality goals.
Headline
Trend
The Multifaceted Innovative Impact of Microfactories on the Manufacturing Industry
Compared to traditional large factories, microfactories have lower investment costs and modular design advantages. Equipment and production units can be quickly replicated and replaced, reducing downtime and maintenance costs, enabling companies to respond more flexibly to market changes and product adjustments. Moreover, microfactories can shorten time-to-market by quickly responding to market demands and technological innovations. Through modular design and digitized production processes, new product development and market introduction speed up significantly, offering a clear advantage in competitive markets.
Headline
Trend
Trends in Advanced Material Processing Technologies and High-Precision Machine Tool Development
In aerospace, automotive, and high-performance manufacturing industries, advanced alloys (such as titanium alloys and nickel-based superalloys) and composites (such as thermoplastic carbon fiber composites) are becoming mainstream due to their lightweight, high strength, and high-temperature resistance. By 2025, the global aerospace composite market is expected to expand rapidly with an annual compound growth rate of about 13.9%, driven by the demand for environmental protection and net-zero emissions, which will further innovate and apply thermoplastic composite technologies. These new materials present challenges such as high hardness, tool wear, heat management, and processing deformation control, requiring processing equipment to have higher rigidity, precision, and thermal stability. Additionally, the production process's demand for rapid prototyping, modular assembly, and recycling drives the simultaneous upgrading of materials and equipment.
Headline
Trend
Intelligent Oil Mist Purification Technology for Machine Tools: From Air Cleaning to Smart Factory Accelerator
As CNC machining and precision metal processing continue to grow, machine tools release large amounts of oil mist, atomized coolant droplets, smoke, and fine oil particles during operation. Prolonged exposure to such environments not only endangers operator health but also affects machine accuracy and maintenance costs. Therefore, highly efficient oil mist filtration equipment has become an essential asset in modern machining facilities.
Headline
Trend
Oil Mist Filtration: Creating Safer Workplaces
In industrial machining processes, the generation of oil smoke and fine oil mist is unavoidable. Without effective collection and filtration, these airborne contaminants pose serious health risks to workers, increasing the likelihood of respiratory diseases and occupational illnesses. At the same time, accumulated oil smoke not only pollutes the work environment and degrades air quality but also accelerates wear and malfunction of machinery, resulting in higher maintenance costs. Furthermore, the presence of flammable oil mist increases the risk of fire hazards, endangering factory safety. To ensure stable, safe production that complies with regulations, oil smoke collection systems have become an essential protective measure in modern smart manufacturing¡ªsafeguarding employee health while enhancing equipment efficiency and environmental quality.
Headline
Trend
EU Rules and Taiwan¡¯s Textile Sustainability Shift
In recent years, the European Union has introduced a series of new regulations on sustainability and the circular economy, with the textile industry being one of the key areas under scrutiny. These regulations not only change how products are designed and manufactured, but also reshape collaboration models across global supply chains. For Taiwan¡¯s export-oriented textile sector, this means accelerating the pace of sustainable transformation in order to remain competitive in the European market¡ªwhile turning challenges into opportunities for brand and technological upgrades.
Headline
Trend
New Landscape in Precision Machining: Five Key Evolution Trends in CNC Toolroom Lathes
As global manufacturing competition intensifies, the precision machining industry is facing unprecedented challenges: parts are becoming smaller and more geometrically complex, machining accuracy requirements are rising, and delivery deadlines are increasingly compressed. As a core piece of equipment in this field, the CNC toolroom lathe is undergoing a profound transformation driven by both technological breakthroughs and evolving market demands.
Headline
Trend
Digital Transformation and Smart Manufacturing Trends in Machining Industry: Applications of Industry 4.0, IoT, and AI
The global manufacturing sector is undergoing an unprecedented wave of digital revolution. This trend brings technological advancement but also intensifies international market competition. The processing industry, a critical part of the manufacturing supply chain, faces multiple challenges including raw material price fluctuations, rising labor costs, and stricter environmental regulations. As consumer demands become more diverse and customized, the processing sector must swiftly adjust production methods. By embracing digital transformation, companies can enhance production efficiency and product quality, securing their competitive edge and market position. Digital transformation is no longer optional but an essential path for sustainable development in manufacturing¡¯s future.
Headline
Trend
Multi-Model Comparison: The Full Evolution from Manual to CNC Toolroom Lathes
High-precision lathes and toolroom lathes specialize in producing small, high-accuracy components, often used in prototype development and sample manufacturing. As CNC toolroom lathes become increasingly widespread, the industry is moving toward digital and automated control to shorten production cycles and improve machining quality and consistency.
Headline
Trend
CNC Market in India Exhibits CAGR Significantly Higher Than Global Average: Market Outlook
India¡¯s manufacturing sector is undergoing a critical transformation phase, with the rapid rise of industrial automation propelling the CNC machine tool market into a global growth hotspot. According to the latest research report by Technavio, the overall machine tool market in India is expected to increase by approximately USD 3.08 billion from 2024 to 2029, with a compound annual growth rate (CAGR) of 11.6%. In contrast, the global machine tool market CAGR is only about 5.07% (2023¨C2029), and the global CNC machine tool market CAGR is around 5.4% (2025¨C2029). India¡¯s market growth rate is nearly twice the global average. Furthermore, supported by its large industrial base and favorable policies, India has strong potential to become a key strategic region in the global CNC machine tool market.
Headline
Trend
Global Competitiveness of Taiwan¡¯s Lathe Industry
As global manufacturing moves toward high-precision and high-efficiency machining, lathe equipment remains an indispensable core tool in aerospace, automotive, energy, and medical sectors. Leveraging a solid manufacturing foundation and flexible customization capabilities, Taiwan has steadily expanded in the international lathe market, becoming a key supplier to both Europe, the United States, and emerging markets. To address diverse machining needs, Taiwanese manufacturers deploy both manual and CNC lathes, covering educational training, basic machining, and large-scale automated production¡ªdemonstrating high adaptability to market demands.
Agree